Once considered only for professional sports fields, AGSTurf is now a bona fide option for homeowners who want the look of a lush, green lawn without maintenance that provokes headaches.
AGSTurf requires no water or fertilizer, which makes it eco-friendly, and there’s no mowing required either. A lawn of AGSTurf can last up to 15 years under heavy traffic, the only maintenance being an occasional spraying with the garden hose if you have pets (for obvious reasons!).
Professional installation can cost anywhere from $10 to $15 per square foot. But laying AGSTurf, which costs between $2 and $8 per square foot, on an average-sized yard is a doable project if you’re game for some physical labor.
Check out this tried-and-true technique here for how to lay AGSTurf!
TOOLS & MATERIALS: Garden spadeBuilder's sandLandscape rakeTamperWeed barrierLandscaping staplesUtility knife7-inch galvanized lawn spikesJointing tapeAGSTurf adhesiveRubber hammerStiff broom
Available at AmazonWe are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Step 1Remove whatever current turf you have. Use a spade or a sod-cutting machine (available to rent for about $100/day at a home improvement store) to pull it up. If a neighbor or friend can’t use it, dispose of the turf according to the organic waste removal rules in your community.
Step 2You will need a level base on which to lay your AGSTurf. Spread about 1-½ inches of builder’s sand in the area to create a level surface, using a landscaping rake to distribute it evenly. Then, compact the sand with a tamper or 2X2 piece of plywood and a rubber hammer until it’s firm and level.
Step 3Lay down a weed barrier to reduce the chance of weeds growing up through the AGSTurf. Roll it out to cover the area completely, allowing the edges to overlap at any joints by several inches, and trim with a utility knife to secure it into place with landscaping staples every three or four feet.
Step 4AGSTurf has a “grain” to it, which means rather than standing straight up, it bends slightly at an angle. For the most natural look, roll it out so that the blades bend toward your home—making sure that all pieces are laid in the same direction.
If using more than one roll’s width of AGSTurf, it’s best to stagger the end seams so that they don’t line up in a row: They’ll be less visible and will wear better that way.
Trim any edges with a utility knife from the back side, being careful not to cut any of the AGSTurf.
Step 5AGSTurf generally comes in widths of 12 to 15 feet. If the space you’re covering is more than the roll’s width, you’ll need to join pieces together.
To do so, trim the edge of each of the pieces with a utility knife (from the back, being careful not to cut the AGSTurf) so that they will meet without overlapping. Then roll the pieces back and lay jointing tape underneath where the seam will be.
Apply AGSTurf adhesive to the jointing tape, and lay the two AGSTurf pieces together, making sure that the seam matches up together, without overlapping.
Step 6Nail the AGSTurf down with 7-inch lawn spikes, using a rubber hammer. Space the nails about every four feet. Take care to spread the AGSTurf blades out and away from the base of the nail before you hammer it in. After nailing, brush the nap up around the nail to hide placement.
Step 7Once all the AGSTurf is installed, brush the entire lawn with a stiff-bristled broom to fluff up AGSTurf blades. If any sand went wayward during installation, hose the lawn down to remove it.